0000070: Cannot recieve files using bluetooth

Viewing Issue Simple Details [ Jump to Notes ]

[ View Advanced ] [ Issue History ] [ Print ]

Category

Severity

Reproducibility

Date Submitted

Last Update

0000070

[obex-data-server] General

major

always

2008-04-03 17:01

2008-05-14 04:21

Reporter

iamer

View Status

public

Assigned To

skirsdeda

Priority

normal

Resolution

no change required

Status

closed

Product Version

0.3.1

Summary

0000070: Cannot recieve files using bluetooth

Description

I am trying to send files from a mobile phone ( N70 and W960i ) to my laptop using a usb dongle. The phone always complains "Failed to connect".

I remember this used to work when I had Gutsy and when i first upgraded to Hardy. I have all bluetooth related packages installed and updated, and using bluetooth-applet the laptop is discoverable and file receiving is enabled.

Expected :
Sent file should be received.

What happened :

obex-data-server is running and creates its dbus service fine. I can send things from the laptop to the mobile. I have hcidump of the failed connection mobile --> laptop.

HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 1 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
< ACL data: handle 1 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> ACL data: handle 1 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0003
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> ACL data: handle 1 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< ACL data: handle 1 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
> ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 1 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 672
< ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 672
> ACL data: handle 1 flags 0x02 dlen 17
    L2CAP(d): cid 0x0040 len 13 [psm 1]
        SDP SS Req: tid 0x1 len 0x8
          pat uuid-16 0x1105 (OBEXObjPush)
          max 65535
          cont 00
< ACL data: handle 1 flags 0x02 dlen 14
    L2CAP(d): cid 0x0040 len 10 [psm 1]
        SDP SS Rsp: tid 0x1 len 0x5
          count 0
          cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4

I ran obex-data-server like this, and didn't get any useful messages :

obex-data-server --no-daemon
** Message: obex-data-server 0.3.1
** Message: Using Session bus
** Message: server socket created
** Message: Server created by: :1.5

** (obex-data-server:18583): WARNING **: Server path: /home/iamer/Desktop
** Message: Default adapter

Additional Information

Notes
(0000208) iamer (reporter) 2008-04-05 15:11	It seems to be a bug in latest bluez-utils package ... downgrading to bluez-utils_3.24-0ubuntu2_amd64.deb and using gnome-obex-server solves it.

Issue History
Date Modified	Username	Field	Change
2008-04-03 17:01	iamer	New Issue
2008-04-05 15:11	iamer	Note Added: 0000208
2008-05-14 04:21	skirsdeda	Status	new => resolved
2008-05-14 04:21	skirsdeda	Resolution	open => no change required
2008-05-14 04:21	skirsdeda	Assigned To	=> skirsdeda
2008-05-14 04:21	skirsdeda	Status	resolved => closed

Relationships